WX845L 20V Power Share 7.25″ Cordless Sliding Compound Miter Saw (Battery Charger Included)Power Saws

The Nitro WX845L 20V Power Share 7.25 in. Cordless Sliding Compound Miter Saw has the power, expanded functionality, and run time needed to tackle advanced DIY projects or to use for professional work. This 20V Miter Saw is part of the Nitro line of battery-powered tools, which, when paired with Power Share PRO high-capacity batteries, offer extended run times, plus more power and performance than other battery-operated tools on the market. 8-1/4 in. of maximum cutting capacity (@ 90��) gives this Sliding Miter Saw professional-grade operability (5-3/4 in. @ 45��). Work holding clamps on both sides of the blade and the extension wings hold projects of all sizes securely in place for safer, more efficient cutting, making this saw great at cutting flooring, crown molding, door frames and more. The bevel knob ranges from 0-45�� allowing for perfect miter cuts, and cutting depth adjustments make partial cuts, dadoes and rabbets easy (maximum cutting thickness: 2-1/4 in @ 90��, 1.63 in. @ 45��), while the miter detents are handy for cutting the most common angles. This Sliding Miter Saw spins the 7-1/4 in. blade (5/8 in. arbor) at 3600 RPM of no-load speed. And when using a 4.0Ah Power Share PRO battery it offers longer run times than typical 20V Miter Saws. (Up to twice as long as standard 2.0Ah batteries.) It weighs only 21 lbs. so it��s easy to transport from the workshop to the jobsite, saving you the time and hassle of bringing projects back and forth. SOLID BASE The die-cast aluminum table is dent resistant, screws right into your worktable, and built to last PRESET DETENTS Set for the most common miter cut angles so you can get fast and accurate cuts every time SAME BATTERY, EXPANDABLE POWER The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family COMPACT Full-size sliding miter saws are huge and can take up a whole table in a workshop. This 7-1/4�� saw is much easier to make room for SPECS Bevel adjustment from 0-45��, 3600 rpm motor, blade size: 7-1/4�� x 5/8�� arbor, weighs only 21 lbs CUTTING DEPTH Width: @ 90 miter 8 x 8-1/4�� (208mm), @ 45 miter 6 x 5-3/4�� (148mm); Thickness: @ 0 bevel 2 x 2-1/4�� (58mm), @ 45 bevel 2 x 1-5/8�� (42mm) INCLUDES 40T blade, spanner, dust bag, 20V 4.0 Ah Power Share battery, and charger